.jpg)
Lorem ipsum dolor sit amet consectetur adipisicing elit. Minima quam aperiam ullam.
Product details
- Module performance and features:
- XL6009 is a 4A switching current performance boost (BOOST) module. The module uses a second-generation high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577. XL6009 boost module at a lower cost, higher performance, LM2577 module is about to be eliminated.
- Wide input voltage of 3V ~ 32V (5V boost the following work, but digital does not work), the optimum operating voltage range is 5 ~ 32V;
- Wide boost output voltage 5V ~ 35V;
- Built-4A highly efficient MOSFET switch, so the efficiency of up to 94%; (LM2577 current is 3A)
- ultra-high switching frequency 400KHz, can use a small-capacity filter capacitor that is able to achieve very good results, the ripple is smaller and smaller. (LM2577 frequency is only 50KHz)
- with power indicator light
- with a voltage meter display and voltmeter can be self-calibration. It uses a more advanced microprocessor voltage voltmeter error ± 0.05V, Range 0 ~ 35V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage is above 4.5V)
- touch of a button to switch measuring input or output voltage, and has a light show which is being measured voltages, and save the settings, even if the power is off again.
- voltmeter can be turned off when not required to display the touch buttons on the left can be easily achieved.
- With terminals, no iron can also be easy to use, and retention wire connection points.
- with thermal protection and short circuit protection
- Size 60 * 35 * 13.5mm
- Weight 24g
- Technical Parameters:
- Module Properties: non-isolated boost (BOOST)
- Rectification: Non-Synchronous Rectification
- Input Current: 4A (maximum), no-load 18mA (5V input, 8V output, no-load is less than 18mA higher the voltage, the greater the load current.)
- Conversion efficiency: <94% (the greater the pressure, the lower the efficiency)
- Switching Frequency: 400KHz
- Output ripple: 50mV (the higher the voltage, the greater the current, the greater ripple)
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Working temperature: -40 ‘C ~ + 85 'C
- Dimensions: 43mm * 21mm * 14mm (L * W * H)
- IN +: Enter the positive
- IN-: Enter negative
- OUT +: positive output
- OUT-: output negative
